Lenco Marine PL 4201 - Manual (Page 38)

38
Troubleshooting table / Specifications
Troubleshooting table
Please check the following items, before you request for service.
In menu, TUNING-line
can not be selected.
The unit is set to AV mode. Press 1 on the remote
control. 13
Symptom Possible solution Page
No picture, no sound Switch on the set.
Check the 230 V wall outlet.
Press 0/AV repeatedly until the desired operating status
appears. 10
29, 35
No reception Preset the station without using the scartcable.
Press 1 on the remote control.
Connect the antenna.
Check your antenna.
10
10
The TV switches off with
missing antenna input signal This is normal.
15 minutes after the antenna signal has disappeared,
the set will change to standby. 17
Specifications
System:
Frequency Range:
Power Supply:
Power Consumption:
PDP:
HDMI input:
PC-Connection:
Output Power:
Surrounding temperature:
Operating Humidity:
Dimensions:
Weight:
Accessories:
PAL B/G, D/K, I/I, SECAM L Color System
PAL: 2-12, X, Y, Z, S1-S41, 21-69
SECAM: FB-FC, F1-F6, B-Q, 21-69
AC 230V, 50Hz
Operation: approx. 250W
Stand by: approx. 2W
41.58" TYPE (105.6 cm visible)
852 x 480 Pixel
HDMI compliant (type A connector)
HDCP compliant
Suggested scan rates:
PAL: 576i/576p/720p/1080i
NTSC: 480i/480p/720p/1080i
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
1280x720@60Hz / 1280x768@60Hz (according to Graphic card)
10W x 2 (MAX)
Operation: 5°C ~ 40°C
Storage: –20°C ~ 60°C
Less than 80%RH
121(W) x 71.7(H) x 34(D) cm
approx. 39 kg (w/o Accessories)
2 batteries (AAA/R03/UM-4)
Remote control unit
AC cord
HDMI-DVI Cable
Weight and dimensions are approximate. Because we continually strive to improve our products we
may change specifications and designs without prior notice.
3U84011A [E] P35-BACK 20/12/05, 15:22 38