Lanier LD230 - Manual (Page 104)

Registering Addresses and Users for Facsimile/Scanner Functions
92
5
Note
❒ If you press , you can search
by the registered name, user
code, fax number, folder name,
e-mail address, or IP-Fax desti-
nation.
❒ To register the name, key dis-
play, and title, see p.72 “Regis-
tering Names”.
F
Press [Auth. Info], and then press
[TNext]
.
G
Press [Specify Other Auth. Info] on
the right side of Folder Authenti-
cation.
Note
❒ When [Do not Specify] is selected,
the SMB User Name and SMB
Password that you have speci-
fied in Default User Name /
Password (Send) of File Trans-
fer settings applies. For details,
see "User Tools Menu (System
Settings)", Network Guide.
❒ If User Authentication is speci-
fied, contact your administra-
tor.
H
Press [Change] under Login User
Name.
I
Enter the login user name, and
then press [OK].
Note
❒ You can enter up to 64 charac-
ters for the user name.
Reference
p.149 “Entering Text”
J
Press [Change] under Login Pass-
word.
K
Enter the password, and then press
[OK]
.
Note
❒ You can enter up to 64 charac-
ters for the password.
L
Enter the password again to con-
firm, and then press [OK].
M
Press [Folder].
N
Confirm that [SMB] is selected.
Note
❒ To specify a folder, you can ei-
ther enter the path manually or
locate the folder by browsing
the network.
Reference
p.92 “To locate the folder manu-
ally”
p.93 “Using Browse Network to
locate the folder”
To locate the folder manually
A Press [Change] under Path.
B Enter the path where the folder
is located.
Note
❒ Enter the path using this for-
mat: “\\ServerName\Share-
Name\PathName”.
❒ You can also enter an IP ad-
dress.
❒ You can enter a path using
up to 128 characters.
C Press [OK].