Lanier LD230 User Manual
Page 69
Settings You Can Change with User Tools
57
4
❖ The paper sizes you can set for tray 2 are as follows:
• A3L, B4 JISL, A4K, A4L, B5 JISK, B5 JISL, A5L, B6 JISL, A6L,
PostcardL, 8KL, 16KK, 16KL
• 11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 5
1
/
2
"×8
1
/
2
"L,
7
1
/
4
"×10
1
/
2
"L, 7
1
/
4
"×10
1
/
2
"K, 8"×13"L, 8
1
/
2
"×13"L, 8
1
/
4
"×13"L,
11"×14"L, 11"×15"L, 10"×14"L, 10"×15"L, 8
1
/
4
"×14"L, 8"×10
1
/
2
"L,
8"×10
1
/
2
"K, 8"×10"L, 8"×10"K, C5L, C6L, DL EnvL, 4
1
/
8
"×9
1
/
2
"L,
3
7
/
8
"×7
1
/
2
"L, custom size (100-297 mm (3.97"-11.69") wide x 148-432
mm (5.83"-17.00") long)
Reference
p.132 “Changing the Paper Size”
Important
❒ If the specified paper size differs from the actual size of the paper loaded
in the paper tray, a misfeed might occur because the correct paper size was
not detected.
Note
❒ The paper guide for the optional LCT is fixed for A4K, 8
1
/
2
"×11"K size
paper. Contact your service representative if you need to change the paper
size.
❒ If the paper size set for the selector in paper tray is different to the paper
size for this setting, the paper size of the dial has priority.
❒ If you load paper of a size not indicated on the paper size selector in the
paper tray, set the dial to " ".
❒ Default:
• Tray 1: A4K, 8
1
/
2
" × 11"K
• Tray 2: A3L, 11" × 17"L
• Tray 3: A4L, 8
1
/
2
" × 11"L
• Tray 4: A4L, 8
1
/
2
" × 14"L
Reference
p.132 “Changing the Paper Size”
❖ Paper Type: Bypass tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
❖ The paper types you can set for the bypass tray are as follows:
• No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead,
Preprinted Paper, Label Paper, Bond Paper, Thick Paper, OHP, Thin Pa-
per, Cardstock
Note
❒ Default: No Display