Lanier LD230 - Manual (Page 145)

Changing the Paper Size
133
6
Note
❒ Fan the paper before loading.
❒ Straighten curled or warped pa-
per before loading.
G
While pressing the release lever,
adjust the side guides to the new
paper size.
Important
❒ When loading small quantities
of paper, be careful not to
squeeze the side guide in too
tightly, as the paper will not
feed properly.
H
Lock the side lever.
I
While pressing the release lever,
adjust the back guide to the new
paper size.
J
Adjust the paper size selector to
the new paper size.
To adjust the paper size to a size
not indicated on the paper size
selector
A Set the paper size selector to
the p mark.
B Press the {User Tools/Counter} key.
C Press [System Settings].
D Press [Tray Paper Settings].
E Press [Tray Paper Size: Tray 1],
[Tray Paper Size: Tray 2] , [Tray Pa-
per Size: Tray 3] or [Tray Paper
Size: Tray 4] .
F Select the required size, and
then press [OK].
G Press [Exit] or the {User Tools/Coun-
ter} key to exit User Tools.
ZEWY190E
ZEWY200E
ZEWY210E
ZEWY220E