Lanier LD230 User Manual

Page 23

Advertising
background image

11

R CAUTION:

Protect the machine from dampness or wet weather, such as rain and snow.

Unplug the power cord from the wall outlet before you move the machine.

While moving the machine, you should take care that the power cord will not
be damaged under the machine.

When you disconnect the power plug from the wall outlet, always pull the

plug (not the cable).

Do not allow paper clips, staples, or other small metallic objects to fall inside

the machine.

Keep toner (used or unused) and toner containers out of reach of children.

For environmental reasons, do not dispose of the machine or expended

supply waste at household waste collection points. Disposal can take place
at an authorized dealer.

The inside of the machine could be very hot. Do not touch the parts with a

label indicating the “hot surface”. Otherwise, an injury might occur.

If toner or used toner is inhaled, gargle with plenty of water and move into a

fresh air environment. Consult a doctor if necessary.

If toner or used toner gets into your eyes, flush immediately with large

amounts of water. Consult a doctor if necessary.

If toner or used toner is swallowed, dilute by drinking a large amount of wa-

ter. Consult a doctor if necessary.

Avoid getting toner on your clothes or skin when removing a paper jam or

replacing toner. If your skin comes into contact with toner, wash the affected
area thoroughly with soap and water.

If toner gets on your clothing, wash with cold water. Hot water will set the

toner into the fabric and may make removing the stain impossible.

Keep the machine away from humidity and dust. Otherwise a fire or an elec-

tric shock might occur.

Do not place the machine on an unstable or tilted surface. If it topples over,

an injury might occur.

If you use the machine in a confined space, make sure there is a continuous

air turnover.

The fusing section of this machine might be very hot. Caution should be tak-

en when removing misfed paper.

Do not use aluminum foil, carbon paper, or similar conductive paper to avoid

a fire or machine failure.

Advertising
This manual is related to the following products: