Lanier LD230 - Manual (Page 106)

Registering Addresses and Users for Facsimile/Scanner Functions
94
5
E
Select the name whose folder you
want to change.
Press the user name key, or enter
the registered number using the
number keys
Note
❒ If you press , you can search
by the registered name, user
code, fax number, folder name,
e-mail address, or IP-Fax desti-
nation.
❒ To change the name, key dis-
play, and title, see p.73 “Chang-
ing a Registered Name”.
F
Press [Folder].
G
Select the items you want to change.
To change the protocol
A Press [FTP] or [NCP].
B A confirmation message ap-
pears. Press [Yes].
Note
❒ Changing the protocol will
clear all settings made under
the previous protocol.
C Enter each item again.
Reference
p.95 “To register an FTP fold-
er”.
p.98 “To register an NCP
folder”
Changing items under SMB
A Press [Change] under Path.
B Enter the new path where the
folder is located, and then
press [OK].
Note
❒ You can also use Browse Net-
work to specify a new folder.
For details, see p.93 “Using
Browse Network to locate
the folder”.
H
Press [Connection Test] to check the
path is set correctly.
I
Press [Exit].
Note
❒ If the connection test fails, check
the settings, and then try again.
J
Press [OK].
K
Press [Exit].
L
Press the {User Tools/Counter} key.
Deleting a registered folder
Note
❒ To delete a name entirely, see p.73
“Deleting a Registered Name”.
A
Press the {User Tools/Counter} key.
B
Press [System Settings].
C
Press [Administrator Tools], and then
press [TNext].
D
Press [Address Book Management].
E
Select the name whose folder you
want to delete.
Press the name key, or enter the
r e g i s t e re d n u m b e r u s i n g t h e
number keys.