Loading paper, Loading paper into paper trays, B loading paper – Lanier LD230 User Manual
Page 133: Load paper. see p.121 “b loading pa- per, E p.121 “b loading paper, E p.121, 6b loading paper
B Loading Paper
121
6
B Loading Paper
Reference
For paper types and sizes, see
p.162 “Copy Paper”.
Loading Paper into Paper
Trays
Note
❒ You can change the paper size, see
p.132 “Changing the Paper Size”.
A
Pull out the paper tray until it
stops.
B
Square the paper and load it in
the tray with the copying face up.
Important
❒ If you add paper to a paper tray
with paper left inside, a misfeed
might occur.
❒ Do not stack paper over the lim-
it mark.
❒ When loading small quantities
of paper, be careful not to
squeeze the side guide in too
tightly, as the paper will not
feed properly.
Setting special paper in the paper
tray 2
A Load the special paper below
the limit mark of the tray.
Note
❒ Fan the paper before loading.
❒ When using paper such as
translucent paper, straighten
curled or warped paper be-
fore loading.
C
Push the paper tray in until it
stops.
ZEWY100E
ZEWY110E