Lanier LD230 - Manual (Page 139)

x Clearing Misfeeds
127
6
x Clearing Misfeeds
R CAUTION:
Important
❒ When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings will be lost.
❒ To prevent misfeeds, do not leave any torn scraps of paper inside the ma-
chine.
❒ If paper misfeeds occur frequently, contact your service representative.
Note
❒ More than one misfed area may be indicated. When this happens, check all
the areas indicated. See the following charts: A, B, C, D, P, R, Y, Z
❒ Inside the finisher, or inside the front cover, there is a sticker explaining how
to remove misfed paper.
• The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.