Tray paper settings – Lanier LD230 User Manual
Page 68
User Tools (System Settings)
56
4
❖ When 500–sheet finisher is the finisher shift tray:
• When the output tray specified for the interrupting job is the finisher
tray, the interrupting job will be delivered to internal tray 1.
• When the output tray specified for the interrupting job is not the finish-
er tray, the interrupting job will be delivered to the specified output
tray.
❖ When 1000–sheet finisher is the finisher shift tray:
• When the output tray specified for the interrupting job is the finisher
tray, the interrupting job will be delivered to the finisher upper tray.
• When the output tray specified for the interrupting job is not the finish-
er tray, the interrupting job will be delivered to the specified output
tray.
❒ When the 500–sheet finisher or 1000–sheet finisher is installed and stapling is
specified for a job, the job will be delivered to the finisher shift tray, regardless
of the output tray specified.
Tray Paper Settings
❖ Paper Tray Priority: Copier (copier/Document Server)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❖ Paper Tray Priority: Facsimile (facsimile)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❖ Paper Tray Priority: Printer (printer)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❖ Tray Paper Size: Tray 1–4
Select the size of the paper loaded in the paper tray.
❖ The paper sizes you can set for trays 1, 3 and 4 are as follows:
• A3L, B4 JISL, A4K, A4L, B5 JISK, B5 JISL, A5L, 8KL, 16KK,
16KL
• 11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 5
1
/
2
"×8
1
/
2
"L,
7
1
/
4
"×10
1
/
2
"L, 8"×13"L, 8
1
/
2
"×13"L, 8
1
/
4
"×13"L, 11"×14"L,
8
1
/
4
"×14"L, 8"×10
1
/
2
"L, 8"×10
1
/
2
"K, custom size (140-297 mm (5.52"-
11.69") wide x 182-432 mm (7.17"-17.00") long)