Loewe Individual Sound Projector - Manual (Page 20)

- 0
TV sets without RS-232C system interface
Press the button for a long time. The menu MEMORY
appears.
1) LOAD
2) SAVE
[] / [] : Up / Down

[OK] : Enter
MEMORY
56 Select the option LOAD.
Confirm OK.
MEMORY1
MEMORY2
MEMORY3
[] / [] : Select

[OK] : Enter
1) MEMORY LOAD
56 Select the option MEMORY1-3.
Confirm OK x.
➠ All settings you made previously that you did not save are lost when you
load the content of the memory.
Select sound mode
You can choose between different surround sound modes.
Select sound mode by pressing several times.
5 Beam The sound beams from all 5 channels are emitted.
The surround sound effects come into their own when they
play back media recorded in multichannel format.
Stereo+3 Beam The sound is emitted directly in stereo via the left and right
front channel as well as via the centre channel. The left and
right surround channel are emitted via sound beams.
This mode is suitable for playing back live recordings for
example. Singing and instrumental sounds can be appreciated
best near the middle position, whilst the sound reflections
generated on site can be heard on your left and right.
3 Beam The left front and surround channel, as well as the right front
and surround channel, are emitted via sound beams.
The centre channel is emitted directly. This mode is most
suitable for watching films with the whole family due to the
extended listening position range. You can also use this mode
if the listening position is near the back wall meaning that the
left and right surround beam can not be reflected.
Stereo The sound is emitted in stereo via the left and right front
channel.
Everyday use