Loewe Individual Sound Projector - Manual (Page 7)

7 -
For your own safety, and to avoid unnecessary damage to your unit, please read
and follow the safety advice below.
Use for the intended purpose and ambient
conditions
This Sound Projector is intended exclusively for the reception, recording and play-
back of video and audio signals and is designed for the home and office and may
not be operated in rooms with high humidity (e.g. bathroom or sauna) or a high
concentration of dust (e.g. workshops).
The terms of the warranty only cover normal use of the Sound Projector.
IMPORTANT: THE MAINS CABLE OF THIS UNIT MUST BE CONNECTED TO A
SOCKET WITH PROTECTIVE GROUND.
This unit is not disconnected from the mains even when it is switched off provided
it is still plugged into the socket. This status is called Standby. In standby the unit
only uses a small amount of electricity (page 7).
During a lengthy absence the plug should be disconnected from the mains .
The mains plug must be easy to reach to ensure that the unit can be disconnected
from the mains at any time.
If you have moved the device out of the cold into a warm environment, leave it
switched off for about an hour to avoid the formation of condensation.
Always switch off your system (Sound Projector, TV set and any other audio com-
ponents which may be connected) before connecting or disconnecting other
devices or loudspeakers.
PLEASE NOTE: TO AVOID RISK OF ELECTRICAL SHOCK, DO NOT REMOVE THE
COVER (OR THE REAR OF THE UNIT). THERE ARE NO PARTS INSIDE THE UNIT
THAT CAN BE REPAIRED BY THE USER. REPAIRS SHOULD ONLY BE CARRIED
OUT BY A LOEWE DEALER.
Avoid any metal objects, needles, paper clips, liquids, wax or similar getting into
the unit through the ventilation slits at the rear. This can short-circuit the unit
and possibly cause a fire.
If anything should penetrate the inside of the unit, immediately unplug from the
mains and inform customer service to check it.
Always protect the unit from moisture, cold, shock, mechanical stress and dirt .
Do not place anything containing a liquid or burning candles on top of the unit.
The batteries in the remote control may not be exposed to heat, e.g. direct sunlight,
fire etc.
As far as possible, only use original accessories such as Loewe mounting systems.
Supervision
Do not allow children to use the Sound Projector/TV set unsupervised. Do not allow
children to play in the immediate vicinity of the Sound Projector/TV set. They could
knock, push or pull the equipment over and cause injury.
Cleaning
Only clean your Sound Projector with a slightly damp, soft, clean cloth (without
any aggressive cleaning agents).
About this user guide
The information in this guide refers to the Loewe product Individual Sound
Projector.
Unless stated otherwise, the instructions refer to the operating elements on the
Assist remote control.
Paragraphs beginning with the ➠ symbol indicate important hints, tips or conditions
for perfect operation.
Terms which you will find in the menu or printed on the Sound Projector are printed
in bold type.
In the functional descriptions, the necessary operating elements are arranged to
the left of the text which contains the handling instructions.
Loewe RS-232C system interface
In this user guide you will initially find out how to set up and operate the combination
of the Sound Projector with a Loewe TV set with chassis Digital+ HD100 (L710)
or Digital+ HD (L700) with software from V4.x upwards. This combination offers
advantages for the set-up and operation through the harmonised behaviour of the
individual components with each other and through intelligent unit communication
via the Loewe RS-3C system interface.
Afterwards, the set-up or operation is described in connection with other TV sets
which do not have this system interface.
Shipping the Unit
The original shipping box and packaging materials should be used in this case.
To protect the unit as much as possible, pack it in the same way as it was packed
when you originally received it.
For your safety