Lifescan One Touch ll - Manual (Page 31)

The test spot should be white
or ivory-colored, with no tears
or wrinkles.
When
insert
strip
appears, slide the test strip
into the holder, notched end
first, test spot side up. Make
sure you
push the
test strip
all the way
into the
holder
until it
stops.
wait
appears for a few moments.
Then,
apply
sample
appears for five minutes or
until you apply blood to the
test spot.
Step 2: Apply Blood Sample.
With the test strip in the
meter and
apply
sample
on the display, apply a drop
of blood to
the test spot.
R
R
26
Test Spot
LSI-99-221_9/2/99 11/11/99 11:01 AM Page 26