Lifescan One Touch ll - Manual (Page 60)

Selecting the Unit of Measure
The meter is set at the factory
to give results in mg/dL
(milligrams per deciliter), the
unit of measurement used in
the United States. To set your
meter to mmol/L (millimoles
per liter), which is used in
Canada and other countries,
follow the chart on page 59.
Selecting Decimal Point or
Comma
If you choose to have results
displayed in mmol/L, you may
also want to display the results
with a comma (6,4 mmol/L)
rather than a decimal point
(6.4 mmol/L). Select this
option by following the chart
on page 59.
Setting the Date Format
Your meter is set at the factory
to display the month/day/year
of each test result stored in the
meter memory (for example:
September 23, 1999 reads as
9 . 23 . 99). You can set the meter
to display day/month/year
(23 . 09 . 99), as is commonly
read in Europe, by following
the chart on page 60.
Selecting AM/PM or
24-Hour Time
Your meter is set at the factory
to display time in AM and PM
(for example, 8:00
PM ). To set
the time to read in European/
military format (for example,
20:00), follow the chart on
page 61.
Selecting the Data
Management Interface
The ONE TOUCH ® II Meter
has the ability to communi-
cate with several types of data
management systems, which
makes it easier for you and/or
your healthcare professional
55
LSI-99-221_9/2/99 11/11/99 11:01 AM Page 55