Lifescan One Touch ll - Manual (Page 36)

MESSAGE APPEARS WHEN
The meter is ready to
perform a blood, check
strip, or control solu-
tion test.
The meter is performing
internal checks.
The meter is ready
to receive a blood
or control solution
sample. If performing
a check strip test, this
is your signal to remove
the check strip (Side 1)
from the meter. apply
sample
wait
insert
strip
MESSAGE APPEARS WHEN
The meter is counting
down from 45 seconds
to 0.
A blood test is com-
pleted. This indicates
a blood glucose result
when the meter is set
for mg/dL.
A blood test is com-
pleted. The meter is
set for mmol/L, used
in Canada and some
European countries.*
*mm will not appear on the display with check strip, control solution, and
average blood glucose test results.
mm 6. 3
(example)
106
(example)
45 . . . . . .0
31
LSI-99-221_9/2/99 11/11/99 11:01 AM Page 31