Lifescan One Touch ll - Manual (Page 8)

ON/OFF BUTTON. This
button turns the meter on
and off.
DISPLAY. This is where you
read your test results and the
simple messages that help
guide you through the test.
BATTERY COMPARTMENT.
Holds one J-size battery. The
battery is already installed in
your meter. See page 47 for
replacement instructions.
M (MEMORY) BUTTON.
The ONE TOUCH
® II Meter
automatically stores your test
results. Press the M button
when you want to recall past
results. For information, see
page 63.
C (CODE) BUTTON. Each
vial of ONE TOUCH
® Test
Strips has a code number on
the label. Use the C button to
match the meter code with
the code number on the test
strip vial. For information,
see page 14.
TEST STRIP HOLDER. The
dark gray test strip holder
keeps the test strip in place.
The meter reads the color of
the reacted test strip through
the small hole in the test
strip holder. Remove the test
strip holder from the meter for
cleaning. For information, see
page 44.
TEST AREA. When the test
strip holder is removed, the
test area is exposed. The test
area has a clear, protective
coating over the meter optics
window that must be kept
clean and lint-free for accu-
rate results. Be careful not
to scratch or damage this
coating. For information, see
page 45.
3
LSI-99-221_9/2/99 11/11/99 11:01 AM Page 3