Lennox Hearth 8560 - Manual (Page 26)

Personalizing Your Endpoint
Page 12 Mitel ® Model 8560/8660 User Guide – Issue 12, October 2008
Default Feature Codes
The following table lists default feature codes. 2 If your system administrator changes any of the
default codes, you can record the new codes for reference in the “New Code” column.
2. These features shown may or may not be enabled for your system.
NOTES
Most of the following feature codes work when your endpoint is idle. However, if
you are on an active call or if the endpoint is off-hook, you may need to press
(Special) to activate the feature before you enter the feature code.
If you make a mistake when entering a feature code, you can press MUTE to
move the cursor to the left and delete the characters entered, or you can press
*
to cancel the feature.
Feature Page Code New Code
Account Code – Follow Calls 25 391
Account Code – Optional 25 390
ACD Agent – Log In 43 326
ACD Agent – Log In or Log Out 43 328
ACD Agent – Log Out 43 327
ACD Agent – Wrap-up Terminate 44 329
Agent Help – Reject 44 376
Agent Help – Request 44 375
Answer Ringing Call 17 351
Automatic IC Call Access – On and Off 17 361
Automatic Trunk Call Access – On and Off 17 360
Automatic Trunk Answer 30 350
Background Music – On and Off 10 313
Barge-in 45 386
Call Forward – All Calls 31 355
Call Forward – If Busy 31 357
Call Forward – If No Answer 31 356
Call Forward – No Answer/Busy 31 358
Call Logging 33 333
Change Language 10 301
Conference 31 5
Default Station 15 394
Directory 24 307
Display Time And Date 29 300
Do-Not-Disturb 39 370
Do-Not-Disturb – Cancel 39 371
Do-Not-Disturb – On and Off 39 372
Do-Not-Disturb – Override 39 373