Lexmark 302 User Manual
Page 125
The printer also prints a single line of
H’s.
7. If the
H’s do not start where you want your left margin, press
Scroll
↑
or Scroll
↓
until the printer displays the desired value
for the left margin position.
8. Press Enter.
An asterisk (
*
) appears in front of the selected value.
The
forms advance one line and the row of
H’s prints again. This
value is now the current left margin position.
9. Repeat Steps 7 and 8 until the left margin is correctly positioned.
(You can press Line Feed or Load/Eject to move the forms
between printing the rows of
H’s.)
10. Press Stop or Cancel Print to exit the test.
Note: If you want the new left margin position saved when you
turn off the printer, you must save it in a Custom Set.
See “Storing Configuration Parameters” in
IBM 4232
Printer Model 302 Operator Panel Instructions for
information on saving configurations.
You may also adjust the left margin position without
printing the row of
H’s by changing the Left Margin
Position in the Configuration Menu. (See “Using Print
Format and Quality Parameters” in
IBM 4232 Printer
Model 302 Operator Panel Instructions.)
Chapter 1. Setting Up the 4232 Printer Model 302
1-103