Lexmark 302 User Manual
Page 52
Advertising
Using the Printer Verification Test for the F1 Forms
Device
To run the printer verification test, follow these steps:
1. Turn the power On (|) if not already on.
2. Wait until the printer displays
3. Press Stop.
The printer displays
and then may display
Ignore this message until you have attached the printer to your
computer. (Press Stop to turn off the alarm, if necessary.)
4. Press Test.
The printer displays
READY
<A>
NOT READY
<A>
|
29 LINK ERROR
OPERATOR PRINT TESTS
Printer Demonstration
1-30
User’s Guide Model 302
Advertising