Lexmark 302 - Manual (Page 75)

Installing and Using the Dual Purpose Forms Device
(F2)
The following sections describe how to install and use the Dual
Purpose Forms Device (F2).
Note: Make sure that the proper forms device is configured. See
“Preparing for Forms Device Installation” on page 1-10 for the exact
steps.
Installing the Dual Purpose Forms Device (F2)
To install the F2 forms device, follow these steps:
1. Hold the forms device so that the device number F2 is in the
upper left corner facing you. Note the bottom metal bar and the
clips; they will be important later.
Important
The F2 forms device for the 4232 Printer Model 302 has a
box around the F2 emblem. Use only these forms devices in
the printer.
B o t t o m M e t a l B a r
C l i p s
T o p o f F o r m s D e v i c e
T e a r B a r
Chapter 1. Setting Up the 4232 Printer Model 302 1-53