Lexmark 302 User Manual
Page 79
Advertising
Loading Forms in the F2 Forms Device
To load forms in the F2 forms device, follow these steps:
1. Turn the power On (|) (see “Power-On Test” on page 2-3).
2. Wait until the printer displays
3. Press Stop.
The printer displays
and then may display
Ignore this message until you have attached the printer to your
computer. (Press Stop to turn off the alarm, if necessary.)
1 END OF FORMS
LOAD FORMS
NOT READY
<A>
|
29 LINK ERROR
Chapter 1. Setting Up the 4232 Printer Model 302
1-57
Advertising