Lathem PC2000 - Manual (Page 10)

PC2000/PC100 Terminal User’s Guide
2
C H A P T E R 2
Mounting the PC2000
Decide where to mount your clock. Keep in mind that the AC adapter plugs
into a wall outlet.
To mount the clock, you need the following items
Drill with a 5/16” bit
Hammer
Phillips head screwdriver
Cables and connectors for your specific installation
1. Screw the mounting bracket to the wall
» Hold the bracket against the wall so the top is 54 inches from the floor
» Mark the mounting bracket holes with a pencil
» Remove the bracket and drill a 5/16-inch hole at your marks
» Insert an anchor into each hole, tapping it with a hammer until it is flush
against the wall
» Align the mounting bracket back on the wall