Linksys CISCO WRT610N - Manual (Page 17)

Chapter 3
Advanced Configuration
15 Simultaneous Dual-N Band Wireless Router
Encryption WPA2 supports two encryption methods
with dynamic encryption keys; AES or WPA-TKIP/WPA2-
AES. You must select WPA-TKIP or WPA2-AES to connect
to the Router.
Passphrase Enter a passphrase of 8-63 characters.
Key Renewal Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default Key Renewal period is 3600 seconds.
WPA2 Enterprise
This option features WPA2 used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
WPA2 Enterprise
Encryption WPA2 supports two encryption methods
with dynamic encryption keys; AES or WPA-TKIP/WPA2-
AES. You must select WPA-TKIP or WPA2-AES to connect
to the Router.
RADIUS Server Enter the IP Address of the RADIUS
server.
RADIUS Port Enter the port number of the RADIUS
server. The default value is 1812.
Shared Key Enter the key shared between the Router
and the server.
Key Renewal Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default Key Renewal time out period is 3600
seconds.
RADIUS
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
RADIUS
IMPORTANT: If you are using WEP encryption,
always each device in your wireless network
MUST use the same WEP encryption method and
encryption key, or else your wireless network will
not function properly.
RADIUS Server Enter the IP Address of the RADIUS
server.
RADIUS Port Enter the port number of the RADIUS
server. The default value is 1812.
Shared Key Enter the key shared between the Router
and the server.
Encryption Select a level of WEP encryption,
64 bits 10 hex digits or 128 bits 26 hex digits. The
default is 64 bits 10 hex digits.
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
Tx Key Select a key from the drop-down menu.