Linksys CISCO WRT610N - Manual (Page 24)

Chapter 3
Advanced Configuration
22 Simultaneous Dual-N Band Wireless Router
If you click Edit, the FTP Folder screen appears. Refer to
the “FTP Folder Screen” section above.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. For more information,
click Help.
Storage > Administration
The Administration screen allows you to manage the users
and groups of users that can access the shares.
Storage > Administration
Information
Server Name Enter a name that will be used for the
network storage FTP and Media server. Punctuation,
spaces, and other special characters (e.g., * / | \) cannot be
used in the name.
Workgroup Name Enter the Workgroup Name of your
Router in the local network.
The (FTP and Media) Server LAN IP Address and the (FTP)
Server Internet IP Address are displayed here.
User Management
The available users are listed in the User Management
table. The two default users, Admin (read and write
access) and Guest (read-only access) cannot be deleted.
Click Create New User to create a new user.
If you click Create New User, the User Account screen
appears.
Each user you created on the User Account screen will be
listed with its group, which you can edit or delete. Select
Edit to edit a user or Delete to delete the user.
If you click Edit, the User Account screen appears. Refer to
the “User Account Screen” section.
User Account
User Account Screen
Users can be added, edited or deleted through the User
Account screen:
Enter a user name for the user. 1.
Enter the full name and description for the user. 2.
Enter a password and enter it again in the 3. Confirm
Password field.
Select
4. Admin or Guest from the Group Member drop-
down menu. You can create a new group in the Group
Management section.
Click
5. Save Settings to save the new changes, or click
Cancel Changes to cancel the changes. Click Close to
close the screen.