Linksys CISCO WRT610N - Manual (Page 34)

Chapter 3
Advanced Configuration
32 Simultaneous Dual-N Band Wireless Router
End IP Address For the range of IP addresses used by
devices on your local network, the ending IP address is
shown here.
DHCP Client Table Click DHCP Client Table to view the
DHCP Client Table. It lists computers and other devices
that have been assigned IP addresses by the Router.
For more information, click Help.
Status > Wireless Network
The Status > Wireless Network screen displays the status
information of your 5 GHz and/or 2.4 GHz wireless
networks.
Status > Wireless Network
5GHz/2.4GHz Wireless Network
MAC Address The MAC Address of the Router’s wireless
interface is displayed here.
Mode The wireless mode (Mixed, Wireless-N Only,
Wireless-G Only, Wireless-B Only, Wireless-A Only or
Disabled) used by the network is displayed here.
Net work Name (SSID) The name of the wireless network
or SSID is displayed here.
Radio Band The Radio Band setting selected on the Basic
Wireless Settings screen is displayed here.
Wide Channel The Wide Channel setting selected on the
Basic Wireless Settings screen is displayed here.
Standard Channel The Standard Channel setting
selected on the Basic Wireless Settings screen is displayed
here.
Security The wireless security method used by the Router
is displayed here.
SSID Broadcast The status of the SSID Broadcast feature
is displayed here.
For more information, click Help.