Linksys CISCO WRT610N - Manual (Page 22)

Chapter 3
Advanced Configuration
20 Simultaneous Dual-N Band Wireless Router
Shared Folder
Each Display Name you created on the Shared Folder
screen will be listed with its partition and shared folder,
which you can edit or delete. Select Edit to edit an item or
Delete to delete the item.
If you click the Edit, the Shared Folder screen appears.
Refer to the “Shared Folder Screen” section above.
Format Disk
Select the disk you want to format, then click Format Disk
to format the disk and create a new partition. If your hard
drive is formatted with multiple partitions, it will delete
them and create a single partition. Enter the name of the
partition you want to format. Select Format to start the
formatting or Cancel to cancel it before it begins.
Format Disk
Storage > Media Server
An external USB hard drive or USB disk must be connected
to the USB Port of the Router to use the storage feature.
Storage > Media Server
Setup
Server Name The name of the router’s media server
is displayed here. It can be changed on the Storage >
Administration screen.
UPnP Media Server To use the Router’s media server
function, select Enabled. Otherwise, select Disabled.
Database
This section lets you select content to add to the database
of the Router’s media server. Click Specify Folder to Scan
to add a media folder to the Database table.
If you click Specify Folder to Scan, the Media Folder
screen appears.
Media Folder Screen
Use this screen to add a Media folder.
Media Folder
Display Name Enter a display name that will appear in
the Database table of the Media Server screen.
Partion The name of the Partion to share, that you
selected in the Shared Folder will appear here.
Location The location of the shared folder is displayed.
New Folder To create a new folder, enter a name for the
folder and click Create.
Share entire Partion To share the entire partition, click
the check box for Share entire Partion.
If you don’t want to share the entire partition, you can
specify the folder you do want to share. Select a folder
name to share. To see a sub-folder, click Enter into Folder.
To return to the previous folder, click Return to Upper
Folder. To create a new folder, enter a name in the New
Folder field, then click Create.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. For more information,
click Help.