Line 6 AXSys 212 User Manual

Page 29

Advertising
background image

Description of Features: Chapter 3

AxSys 212 User Manual

29

If the

EQ ON/OFF

parameter is turned off, the Graphic EQ will not have any effect

on the Sound (see page 35). If you adjust any of the Graphic EQ parameters, the
display will flash

OFF twice to indicate it is turned off.

Tremolo

Mono Tremolo

2

fluctuates loudness, and Stereo Tremolo alternates

loudness in opposite channels. On slow speeds with a soft shape, stereo
tremolo provides continuous panning. At low to moderate depths and
moderate speeds, itÕs like the sound of classic electric piano tremolo.

Parameter

Range

Description

Tremolo Type

Off, 1 to 3

Selects the type of Tremolo effect (see below).

Tremolo Speed

00 to 99

Controls the rate at which the sound changes amplitude.

Tremolo Depth

00 to 99

Controls how strong the tremolo will be.

Tremolo Shape

00 to 99

Selects either soft (gradual) or hard (drastic) transitions.

The

TREMOLO TYPE

lets you choose from the following Tremolo types:

Display Tremolo Type Description

OFF

No Tremolo

Tremolo is disabled.

1

Mono Tremolo

Provides the classic Tremolo useful in recreating the
sound of older guitar amps.

2

Stereo Tremolo
at 90

°

This two channel Tremolo has the left and right channels
close together; i.e. when one is on, the other is 1/2 on, and
when one is off, the other is 1/2 off.

3

Stereo Tremolo
at 180

°

This two channel Tremolo has the left and right channels
perfectly out of phase; i.e. when one is on the other is off.

Left

Right

100%

100%

Mono Tremolo

Left

Right

100%

50%

Stereo Tremolo 90¡

Left

Right

100%

0%

Stereo Tremolo 180¡

If the

TREM/CHORUS ON/OFF

parameter is turned off, the Tremolo effect will not

be heard (see page 35). If you adjust any of the Tremolo parameters, the display
will flash

OFF twice to indicate it is turned off.

The Tremolo parameters are disabled when the Rotary type of Chorus is selected.
If you attempt to modify the Tremolo parameters, the display will temporarily
read

---

.

2

Some guitar amps mistakenly call this ÒvibratoÓ, but this is incorrect. Vibrato is actually

the fluctuation of pitch, whereas tremolo is a fluctuation of volume.

Advertising