Line 6 AXSys 212 - Manual (Page 37)

Description of Features: Chapter 3
AxSys 212 User Manual 37
Aux Input Reverb
This controls the amount of reverb that is added to the Aux Input signal.
When set to 0, no reverb is added and the Aux Input signal is ÒdryÓ. When
set to 99, the reverb is added at its maximum level and the Aux Input
signal is ÒwetÓ.
Global Controls
The following four controls are found on the far right end of the first top
two Edit Rows. As their name ÒGlobalÓ implies, these four parameters are
set once for all Sounds; i.e. their settings are static and do not change from
one Sound to another.
Parameter Range Description
MIDI Channel 01 to 16 Selects the basic MIDI channel.
Transmit Sounds 01A to 32D,
Edit, All Lets you transmit one or all User Sounds via the
MIDI OUT
connector.
Gate/Hum Per
Sound Snd, All Determines whether the Noise Gate and Hum
Canceller parameters will change when a new Sound
is selected.
Aux Per Sound Snd, All Determines whether the Aux Input parameters will
change when a new Sound is selected.
MIDI Channel
The MIDI CHANNEL parameter determines which of the 16 available MIDI
channels is used to send and receive program changes and controller
messages (controller 7 for Volume, controller 3 for Wah). It can be set
between
1 and 16.
Transmit Sounds
The TRANSMIT SOUNDS parameter lets you transmit either a single User
Sound or all User Sounds in memory via the MIDI OUT connector. This
information can be sent to a MIDI storage device, such as a computer
running a sequencer or editor/librarian software, or to another AxSys 212.
Display Transmitted via MIDI
01A to 32d Any single Sound in the User Bank (01-32, A-D)
Edt The current Sound being edited
ALL
All 128 Sounds in the User Bank
Use the TRANSMIT SOUNDS parameter to select what you want to transmit.
You can choose any User Sound from
01A to 32d, or Edt (the current
Sound in the edit buffer) or
ALL (all Sounds in the User Bank). Once
youÕve made your selection, press the STORE button to execute the
transmission; the display will temporarily read
trA.