Lucent Technologies M770 - Manual (Page 20)

Chapter 2 Agent Configuration
10 Cajun M770 ATM Switch Manager User’s Guide
OR
Press DEL.
3 Repeat the procedure for each manager.
4 Click Apply .
Editing the Managers Table
To edit the managers list:
1 Click on the IP address field and change the IP address of the designated
management station. After the changes take effect, the management station’s name
will be displayed automatically in the
Device Name column, if available.
2 Click Apply . The change takes effect immediately.
3 Repeat the procedure for each manager.
Note: It is recommended to keep the list limited to actual and relevant managers, so as
not to place undue stress on the agent.
Note: The indicated manager receives trap reports only when the Trap Report check
box for that manager is checked.