Lucent Technologies M770 - Manual (Page 45)

Chapter 7 Managing LANE Services
Cajun M770 ATM Switch Manager User’s Guide 35
Updating the LECS ELANs Table
To update the LECS ELANs Table:
1 Select an ELAN from the LECS ELANs table by clicking on it and Click Update .
OR
Double-click an ELAN from the LECS ELANs table. The LECS ELANs table
expands to allow editing. The fields contain the ELAN information of the selected
ELAN.
2 Change the information in the lower part of the dialog box.
3 Click Apply .
4 To hide the lower part of the dialog box, click Cancel .
Deleting ELANs
To delete ELANs from the LECS ELANs Table:
1 Select an ELAN from the LECS ELANs table by clicking on it.
2 Click Delete . A confirmation box is displayed.
3 Click Yes . The ELAN is no longer recognized by the LECS.
Viewing Registered LESs
Additional information about LESs that are registered with an ELAN may be viewed in
the Registered LESs on ELAN window.
To view the Registered LESs on ELAN window:
1 Highlight an ELAN in the LECS ELANs Table.
2 Click the Registered button. The Registered LESs on ELAN window is displayed.
Figure 7.5 Registered LESs on ELAN Window
The Registered LESs on ELAN window lists the ATM address, mode, and LEC ID
range of each registered LES for the selected ELAN.
Note: Each module that hosts a resilient LECS must have the same LECS ELAN
configuration.