Check the paper type setting, Check the paper, The toner may be low – Lexmark 5025 User Manual
Page 142: The fuser may be worn or defective, Print is too dark, Calibrate the color
These are possible solutions. Try one or more of the following:
T
HE
PAPER
MAY
HAVE
ABSORBED
MOISTURE
DUE
TO
HIGH
HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK
THE
PAPER
TYPE
SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1
From the printer control panel Paper menu, check the Paper Type setting.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.
C
HECK
THE
PAPER
Avoid textured paper with rough finishes.
T
HE
TONER
MAY
BE
LOW
When 88 <color> cartridge low appears or when the print becomes faded, replace the toner cartridge.
T
HE
FUSER
MAY
BE
WORN
OR
DEFECTIVE
Replace the fuser.
Print is too dark
These are possible solutions. Try one or more of the following:
C
ALIBRATE
THE
COLOR
The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced, then
you can calibrate the colors manually:
1
From the printer control panel, press
.
2
From the Admin menu, press the arrow buttons until Settings appears, and then press
.
Troubleshooting
142