Lexmark 5025 - Manual (Page 76)

Menu item Description
Mac Binary PS
Auto
On
Off
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
• Auto is the factory default setting.
• The Off setting filters print jobs using the standard protocol.
• The On setting processes raw binary PostScript print jobs.
Network Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
Sets printer settings on jobs sent through a network port
Note: Certain options are not available on selected printer models.
Reports menu
This menu is available from the Network/Ports menu:
Network/Ports  Network Menu  Reports
Menu item Description
Print Setup Page Prints a report containing information about the current network setup
Note: The Setup Page contains information about the network printer settings, such as the TCP/IP address.
Network Card menu
This menu is available from the Network/Ports menu:
Network/Ports  Network Menu  Network Card
Menu item Description
View Card Status
Connected
Disconnected
Lets you view the connection status of the network card
View Card Speed Lets you view the speed of a currently active network card
Network Address
UAA
LAA
Lets you view the network addresses
Job Timeout
0-225 seconds
Sets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
• 90 seconds is the factory default setting.
• A setting value of 0 disables the timeout.
• If a value of 1–9 is selected, then the setting is saved as 10.
Understanding printer menus
76