Using the multipurpose feeder – Lexmark 5025 User Manual
Page 44
Using the multipurpose feeder
1
Push the feeder release latch to the left to open the multipurpose feeder.
2
Grasp the extension, and pull it straight out until it is fully extended.
3
Prepare the paper for loading.
•
Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
•
Hold transparencies by the edges and fan them. Straighten the edges on a level surface.
Note: Avoid touching the print side of transparencies. Be careful not to scratch them.
•
Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level
surface.
4
Locate the stack height limiter and tab.
Note: Do not exceed the maximum stack height by forcing paper under the stack height limiter.
Loading paper and specialty media
44