Lexmark 5025 - Manual (Page 27)

1 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
1 2
Make sure the printer and computer are fully on and ready.
Do not connect the USB cable until instructed to do so on the screen.
2 Insert the Software and Documentation CD.
3 Click Install Printer and Software.
4 Click Agree to agree to the License Agreement.
5 Click Suggested, and then click Next.
6 Click Wireless Network Attach.
7 Temporarily connect a USB cable between the computer on the wireless network and the printer.
2 1
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so you
can print wirelessly.
Additional printer setup
27