Lanner electronic FW-7890 - Manual (Page 27)

20
1.5 FW-7890 19” 2U Rackmount Firewall Mechanisms
This section of the manual describes the mechanical and device nomenclature of FW-7890.
1.5.1 Face Panel
Figure 5 – FW-7890 Face Panel
Face Panel LED Status and Behavior
The following table lists and explains the behavior of each LED on the FW-7890 front panel.
LED Color Status Description
Green
On When FW-7890 power is switched ON
PWR
N/A Off No power connected
Yellow On Hard disk under access
HDD
N/A Off No Data access
Green
On When LAN is connected
Ethernet Ports
Link/ACT
Orange Flash When Data is accessing
Status
Lanner Provide the Sample Code, Reference the
Driver/Manual CD. The path is under /LED_Status
„ Console Port: via the console port cable, this connector attaches FW-7890 to
the host PC.
The Default baud rate is 115200.
„ LAN Connector: Ethernet RJ-45 connector, connected to networking environment
using a RJ-45 Ethernet cable
„ LCM & Keypad Please reference the Appendix B
USB
LCM
LED Status Hard disk Tray
Console Keypad LAN Connector