Lanner electronic FW-7890 - Manual (Page 47)

3.12 Save and Exit Setup
Pressing <Enter> on this item asks for confirmation:
Save to CMOS and EXIT (Y/N)? Y
Pressing “Y” stores the selections made in the menus in CMOS – a special section of
memory that stays on after you turn your system off. The next time you boot your
computer, the BIOS configures your system according to the Setup selections stored in
CMOS. After saving the values the system is restarted again.
3.13 Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Q u i t w i t h o u t s a v i n g ( Y / N ) ? Y
This allows you to exit Setup without storing in CMOS any change. The previous selections
remain in effect. This exits the Setup utility and restarts your computer.