Lanner electronic FW-7890 - Manual (Page 37)

processors mode supported.
Disabled Disables CPU Hyper Threading Feature.
Quick Power On Self Test : The default setting is “Enabled”. This speeds up the Power On
Self Test (POST) by skipping some items that are normally checked during the full POST. If
your system is functioning normally, you can choose this feature to speed up the booting
process.
First / Second / Third / Other Boot Device : The BIOS attempts to load the operating system
from the devices in the sequence selected in these items. The settings are Floppy, LS/ZIP,
HDD-0/HDD-1/HDD-2/HDD-3, SCSI, CDROM, LAN, and Disabled
Boot Up Numlock Status : The default setting is “On”. If set “Off”, the cursor controls will
function on the numeric keypad.
Security Option : This setting controls the password in the main screen. The options are
“Setup” and “System”. Select “Setup” and it will protect the Setup Utility settings from being
tampered with. Select “System” if you want to use password feature every time the system
boots up. The default setting is “Setup”. You can create your password by using the
“SUPERVISOR/USER PASSWORD” utility on the main program screen.
PS/2 Mouse Function Control : When this option is set Enabled, AMIBIOS supports a PS/2
type mouse. The settings are Enabled or Disabled. The default setting is Disabled. System
Boot Up Sequence.
HDD S.M.A.R.T. Capability: Enable installs SMART (Self-Monitoring Analysis-Reporting
Technology), which issues a warning if an IDE failure is imminent.
Console Redirection: The console Redirect capability allows a system with no keyboard to
transmit keyboard data to a host system via the COM port.
Enabled
Attempt to redirect console via COM port.
Disabled Attempt to redirect console when keyboard absent.
Auto
If keyboard is plug in the Controller board, the Console
Redirection will not display BIOS screen on remote PC.
If keyboard is not plug in the Controller board, the Console
Redirection will display BIOS screen on remote PC.
Baud Rate : Specify Baud Rate of console redirection.
Configuration options: 9600 / 19200 / 38400 / 57600 / 115200