Dvd]]^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^), Before use – Panasonic DIGA DMR-E75V User Manual
Page 14
14
[[DVD]]
Before Use
You can enjoy progressive video by connecting this unit’s
COMPONENT VIDEO OUT terminals to an LCD or plasma TV
compatible with progressive video.
(1) Television with
Component video
input terminals
(not supplied)
(2) Component video
input (Y/P
B
/P
R
)
(3) Audio input (L/R)
(4) Video cables
(not supplied)
(5) Audio cable
(not supplied)
(6) COMPONENT
VIDEO OUT
(Y/P
B
/P
R
)
(7) AUDIO OUT
(L/R)
Preparation
≥Press [DVD].
[1]
While stopped
Press [FUNCTIONS].
[2]
Press [
3, 4, 2, 1] to select “SETUP” and
press [ENTER].
[3]
Press [
3, 4] to select “Connection” and press
[
2, 1].
[4]
Press [
3, 4] to select “Progressive” and press
[ENTER].
[5]
Press [
3, 4] to select “On” and press [ENTER].
≥Output becomes progressive.
ªTo return to the previous screen
Press [RETURN].
ªCOMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT terminal.
Connection using these terminals outputs the colour difference
signals (P
B
/P
R
) and luminance signal (Y) separately in order to
achieve high fidelity in reproducing colours.
≥The description of the component video input terminals depends on
the television or monitor (e.g.: Y/P
B
/P
R
, Y/B-Y/R-Y, Y/C
B
/C
R
).
Connect to terminals of the same colour.
When making this connection, ensure you connect the audio cables
to the corresponding audio input terminals on the television.
ªRegarding Progressive Television Picture
Progressive image aspect (height to width ratio) is set at a standard
16:9. DVD-Video which has been set at 16:9 will be displayed
correctly. However, 4:3 video material will be stretched to the right
and left when displayed.
To view the picture at the right aspect
≥For televisions that allow the aspect of progressive images to be
adjusted, use the function provided on the television and adjust as
necessary.
≥For televisions which do not allow the aspect of progressive images
to be adjusted, please set “Progressive” to “OFF”. (
Note
≥When connected to a regular television (CRT: Cathode ray tube),
even if it is progressive compatible, progressive output can cause
some flickering. Turn off “Progressive” if this occurs (
≥Video will not be displayed correctly if connected to an incompatible
television.
≥There is no output from the COMPONENT VIDEO OUT terminals if
“AV1 Output” in the SETUP menu is set to “RGB (without
component)”. Set this item to “Video (with component)” (
≥If the unit is connected to the television through VIDEO OUT,
S-VIDEO OUT or AV1 terminal, output will be interlace irrespective
of the settings.
Connecting a Television with Component video input terminals
COMPONENT VIDEO OUT
(PROGRESSIVE/INTERLACE)
AV1 (TV)
AV2 (DECO
OPTICAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
VIDEO
S-VIDEO
VIDEO
AUDIO
R
L
AUDIO
R
L
DVD OUT
DVD/VHS
COMMON OUT
COMPONENT VIDEO OUT
(PROGRESSIVE/INTERLACE)
Y
P
B
P
R
COMPONENT
VIDEO IN
Y
P
B
P
R
(6)
(7)
(3)
(2)
(4)
(1)
(5)
DVD
75VGN.book 14 ページ ２００４年７月２１日 水曜日 午前１１時５４分