Panasonic DIGA DMR-E75V - Manual (Page 56)

56
Advanced Operations
You can change the settings on VHS only with the following
procedure.
For the settings on DVD, press [DVD], [FUNCTIONS], and then
select “SETUP“. (
l 42)
[1]
While stopped
Press [FUNCTIONS].
[2] Press [ 3, 4] to
select a desired
item.
[3] Press [ENTER]
or [
2, 1] to
change the
setting.
∫ To exit the VHS FUNCTIONS screen
Press [RETURN].
This description shows the initial settings for this unit. For
details on menu operation (
l left).
≥Underlined items are the factory presets.
∫VHS FUNCTIONS
Timer recording
( l 54)
QUICK ERASE ( l 57)
You can delete a cassette contents all at once.
Tape length
Set the length of tape you are using so the unit can show the correct
remaining time.
[AUTO ( 2E-240)] [E-195] [E-260] [E-300]
[AUTO ( 2E-240)]: The VHS automatically distinguishes E30,
-60, -90, -120, -180 and -240 tapes.
[E-195]: For E195 tape
[E-260]: For E260 tape
[E-300]: For E300 tape
PB Colour system
When the colour of the display does not look natural during playback
of the tape, select either [PAL] or [MESECAM].
[AUTO] [PAL] [MESECAM]
[AUTO]: This unit automatically detects the format in
which the recording was made and selects the
colour system for playback.
[PAL]: To play back a video cassette recorded in the
PAL signal.
[MESECAM]: To play back a video cassette recorded in the
MESECAM signal.
SQPB
To play back tapes recorded in the S-VHS format (SQPB; S-VHS
Quasi Playback).
[AUTO] [ON] [OFF]
[AUTO]: This unit automatically detects the format in
which the recording was made and selects the
same format for playback. However, picture
distortion may appear. Therefore, set to [ON]
or [OFF].
[ON]: Use this setting when playing back a cassette
tape recorded in the S-VHS format.
[OFF]: Use this setting when playing back a cassette
tape recorded in the VHS format only.
OSD ( l 57)
For automatic display on the TV screen of the TV station information,
type of sound system of the programme being watched and the
sound playback mode.
[4:3] [WIDE] [OFF]
[4:3]: Indications can be displayed on the TV
screen.
[WIDE]: Indications can be displayed on the TV screen
when using wide type of TV screen and
selecting the wide screen mode on the TV
setting.
[OFF]: No indications appears.
Preparation
≥Press [VHS].
Changing the unit’s settings
∫ Common procedures
SLOW/
SEARCH REW FF
DUBBING
DVD/VHS
CREATE
CHAPTER
SKIP/INDEX
PLAY STOP PAUSE
TRACKING/V-LOCK
AUDIO EXT LINK
FUNCTIONS DIRECT NAVIGATOR
TOP MENU
RETURN SUB MENU
PROG/CHECK
VHS REC
TIME SLIP STATUS
DVD REC REC MODE
DVD/VHS
CANCEL/RESET INPUT SELECT
DIRECT TV REC
TIMER
VHS
VHS
G-Code
CREATE
CHAPTER
CH
AV
VOLUME
DVD
DVD
JET REW
ENTER
DISPLAY
AUDIO
FUNCTIONS
RETURN
STATUS
3, 4, 2, 1
ENTER
DVD
VHS
∫
VHS FUNCTIONS
: access ENTER
: return RETURN
: select
Timer recording
QUICK ERASE
Tape length : AUTO ( E - 240)
PB Colour system : AUTO
SQPB : AUTO
OSD : 4 : 3
∫ Summary of settings
VHS
75VGN.book 56 ページ ２００４年７月２１日 水曜日 午前１１時５４分