Panasonic BB-HCE481 - Manual (Page 26)

Troubleshooting
26
Miscellaneous Troubleshooting
Problem Cause and Remedy
The ActiveX
controls cannot
be installed. • Security software disables the ActiveX controls installation.
→ Close the security software, and install the ActiveX
controls again.
The firmware is
not updated. • The firmware updating was not completed due to the power
being turned off, network failure or other cause.
→ Update the firmware again following these steps.
*
1 See page 18 of the Operating Instructions on the CD-
ROM.
* 2 See page 161 of the Operating Instructions on the CD-
ROM.
*
3 See page 164 of the Operating Instructions on the CD-
ROM about updating firmware.
No
Yes
No
Yes
Turn the camera off, and turn the
camera on again.*
1
Enter the IP address in the web browser to access
the camera.
Is the Top page displayed?
Is the version updated?
Access the Maintenance page and click [Status].
Check the firmware version on the Status page.*
2
Update the firmware.* 3
The firmware update is completed.