Panasonic BB-HCE481 - Manual (Page 5)

Troubleshooting
5
BB-HCE481 Indicator Display Troubleshooting
Problem Cause and Remedy
The indicator
lights or blinks
orange. • The Ethernet cable is partly disconnected.
→ Change it to another Ethernet cable.
The indicator
continues
blinking orange. • The camera is turned off when updating firmware.
→ If you access the camera using a web browser, The
Update Firmware page will be displayed. Update the
firmware following the procedure (see page 164 of the
Operating Instructions on the CD-ROM). If you fail to
update the firmware, see page 26.
The indicator
continues
blinking orange
(2-second
interval). • An error has occurred in UPnP™ port forwarding.
→ Set up the camera again in [Automatic Setup] using the
Setup Program following the instructions in Getting
Started.
The indicator
continues
blinking green. • Automatic setup is not complete.
→ Complete the setup following the instructions in Getting
Started.
• The camera did not receive an IP address from the DHCP
server.
→ When setting [Automatic Setup] or [DHCP Setup], the
camera may not be assigned an IP address due to network
failures. Ask your ISP or network administrator for more
information.