Error messages, Specifications, Maintenance – Panasonic SL-DZ1200 User Manual

Page 27: Reference

Advertising
background image

RQT7114

27

Reference

Error messages

Message

CAN NOT EJECT
CUE BANK ERROR

DATA ERROR

FAILED

FILE SELECT ERROR
FORMAT ERROR
NO CD AUDIO TRACK

NO DATA

NO DISC
NO PANEL MODE

NO REMAIN

NO SD AUDIO TRACK

NO SD CARD
REPLACED OLD PANEL DATA

SD CARD FULL

SD CARD PROTECTED

SD LID OPEN
TRACK ERROR

Description

Cannot eject the CD.
After setting the auto cue point, you tried to set
the cue setting without selecting the cue bank.
There is a problem with the data.

A save, load or format error occurred and the op-
eration did not complete.
The wrong file was selected.
You cannot format this SD Memory Card.
The inserted disc is unrecognizable.
The disc has been inserted upside down.
You tried to save to a SD Memory Card, but there
is no sample pad data.
CD is not inserted.
You cannot save panel data when using the CD
PLAYER mode.
You cannot display the current remaining time with
MP3 files.
There are no audio tracks on this SD Memory Card.
The inserted SD Memory Card is unrecognizable
because of damage or an error.
SD Memory Card is not inserted.
The oldest used media panel data was replaced.
You cannot store more than 50 CDs or SD Memory
Cards worth of data items.
You cannot save any more data to the SD Memory
Card.
The SD Memory Card is write protected.

The lid of the SD Memory Card slot is open.
You cannot play this track.
This track data cannot be read.

Action

Pause the unit and eject the CD.
Select the cue bank first.

Use a SD Memory Card that was recorded
properly.
Try saving or loading again. Or try saving to a
new SD Memory Card.
Select the correct file.
Use a new SD Memory Card.
Re-insert the CD properly.

Re-insert the CD properly.
Save using the TURNTABLE mode.

Use a SD Memory Card that was recorded
properly.

Re-insert the SD Memory Card properly.
Save it to a SD Memory Card or initialize the
unit’s memory.

Use a new SD Memory Card.

Release the SD Memory Card write-protect
switch.
Make sure to close the lid.
Select another track or replace with properly
recorded media.

Specifications

To clean this unit, wipe with a soft, dry cloth.

Never use alcohol, paint thinner, or benzine to clean this unit.
Before using chemically treated cloth, read the instructions that came with the cloth carefully.

Maintenance

•Digital audio output

Coaxial digital output

Pin jack

•Headphone

Output level

20 mW max. 32

Ω (adjustable)

•Pickup

Wave length

790 nm

Laser Power

No hazardous radiation is emitted

•General

Power supply

AC 120 V, 60 Hz

Power consumption

20 W

Dimensions (W

X

H

X

D)

320 x 111 x 330 mm

(12

39

/

64

˝ x 4

3

/

8

˝ x 13˝)

Mass

5.8 kg

(12.8 lb.)

Note

Specifications are subject to change without notice.
Mass and dimensions are approximate.

Specifications are the values when playing CD audio in the CD

PLAYER mode with tempo reset.

•Playable media

CD (12 cm) (5˝)

CD-Audio (CD-DA)

CD-R/CD-RW (CD-DA, MP3)

SD Memory Card

•CD-MP3 play format

Compatible compression rate

between 32 kbps and 192 kbps

(Recommended: 128 kbps)

Compatible sampling rate

48 kHz/44.1 kHz/32 kHz

•SD Audio play format

Audio extension format

MPEG2-AAC/MP3

Compatible sampling rate

48 kHz/44.1 kHz/32 kHz

•Audio

No. of channels

2 (stereo)

Frequency response

4 Hz-20 kHz

Output voltage

2 Vrms (0 dB) (JEITA)

Output terminal

Pin jack

Advertising