Pioneer Super Tuner III DVH-P7050 - Manual (Page 37)

Playing Video CDs on
the built-in player
En 37
2 Move the joystick up/down to switch to
the desired setting.
This switches you to the selected setting.
Disc (disc)— Track (track)
• When you select Disc (disc), playback of the
entire disc is repeated. When you select Track
(track), playback of that track only is repeated.
Note
• When the repeat play of a Video CD disc is
selected, play stops and depending on the
disc a menu is displayed upon completion of
play of an entire disc once through.
Selecting audio output
You can select between stereo and monaural
audio output.
1 Move the joystick left/right to select the
audio option.
The audio option is indicated in blue.
2 Move the joystick up/down to switch to
the desired setting.
This switches you to the selected setting.
L+R (left and right)— L (left)— R (right)
Operating from the function dis-
play (DVH mode)
Repeat and pause functions can also be oper-
ated from the head unit’s OEL display.
1 FUNCTION display
Shows the function status.
Press F to display the function names.
Press F repeatedly to switch between the follow-
ing functions:
RPT (repeat play)— PAUSE (pause)
• Pressing FUNCTION on the head unit also
performs the same operation.
• To return to the playback display, press
BAND/ESC .
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press F to select RPT .
Press F until Repeat appears in the display.
• Pressing FUNCTION on the head unit also
performs the same operation.
1
English
Español
Deutsch
F
rançais
Italiano
Nederlands
05
Section