Planet Technology 8-Port IP Power Manager IPM-8001 - Manual (Page 13)

2.5 Connecting The Console
You can control the output devices and manage their power status through the console port
with serial connection. Use the bundled serial cable to connect the COM port of your PC and
the CONSOLE port of the IP Power Manager as shown. Then you can run Hyper Terminal to
control and manage your IP Power Manager.
2.6 Connecting LAN or WAN
- 8 -
The IP Power Manager has an RJ-45 LAN connector that enables you to monitor and
manage the power outlets and digital outputs over the network. The IP Power Manager has a
graphic user interface that allows you to control the device through a web browser. Connect
the IP Power Manager to a free port on your switch using an Ethernet cable. You can then