Planet Technology 8-Port IP Power Manager IPM-8001 - Manual (Page 40)

6.3.3 Date & Time
This page provides the appropriate options below to enable the IP Power Manager date/time to
be changed in different methods. It will show the current date and time of the IP Power
Manager. This can be changed to synchronize with a computer, and enquiry from a time server
(NTP) or manually. For the system time, it should be counted automatically.
Option Description
Current Date and Time
IP Power Manager
System Date
Current date of the IP Power Manager, format is dd/mm/yyyy.
IP Power Manager
System Time
Current time of the IP Power Manager, format is hh:mm:ss.
Configure Date and Time
Set Manually User can set the date and time with the following format: dd/mm/yyyy
and hh:mm:ss.
Synchronize with
computer time
Select this option and click 'Set Value' to synchronize with the time
from the computer clock.
Synchronize with NTP
server
You must configure the NTP server IP and select the correct timezone
to activate this option. After being configured to synchronize with NTP,
the IP Power Manager will synchronize its time with the server
periodically. If Daylight Saving Time enabled, the time will be one hour
earlier than NTP server time.
- 26 -