Planet Technology 8-Port IP Power Manager IPM-8001 - Manual (Page 47)

firmware.
Telnet Connection This is the parameter enabling or disabling the terminal to the server
application (Telnet) control process. (e.g. telnet 192.168.1.1). The
user may configure the Telnet protocol to use a port number other
than the standard Telnet port (23).
HTTP Support Enable/Disable the HTTP connection with the IP Power Manager.
The user may configure HTTP protocol to use a port number other
than standard HTTP port (80).
SNMP Support Enable/Disable the SNMP connection with the IP Power Manager.
The user may configure the SNMP protocol to use a port number other
than the standard SNMP port (161).
6.4.3 Access Control
Configuration of this page is allowed when the security level is “Administrator”. It prevents
unauthorized network access to the IP Power Manager. There are 2 kinds of type for "Access
Type", "Permitted", and "Denied". It is need to set the first item for its "IP Address" to
"255.255.255.255" and "Access Type" to "Permitted" as default value in order to let user is
able to connect to the IP Power Manager.
- 33 -
Option Description
Index The index number of the entry in the table.
IP Address The management station's IP address. "0.0.0.0" means entry not
configured. (e.g. An entry "192.168.7.255" means the client with the
IP address within the range from "192.168.7.0" to "192.168.7.255"