Planet Technology 8-Port IP Power Manager IPM-8001 - Manual (Page 32)

Input Voltage
Threshold Low (Volt)
Low threshold of input voltage. When input voltage is lower than this
value, IP Power Manager will take action specified in the "Inlet Events
Action" table.
Current Event of Inlet Shows the associated event description when there is an event
occurred. If there is no event occurred, it shows "None".
Inlet Events Action
Input Voltage Over
Threshold High
Turn off selected outlets or digital outputs will occur when the input
voltage over high set point.
Input Voltage Under
Threshold Low
Turn off selected outlets or digital outputs will occur when the input
voltage under low set point.
6.1.1.2 Outlets
This page shows the outlet status and allows user to configure the settings.
- 18 -
Option Description
Status
Output Current (Amp) The nominal input currents in Amp.
Power Status When the power status is "Off", the color is Red. If power status is
"On", the color is Green.
Configure
Outlet Name Set the name of this outlet.
Location Set the name of the location of this outlet.
Power On Delay
(Seconds)
Set power on delay time in seconds. The outlet will turn on after the
delay time.