Planet Technology 8-Port IP Power Manager IPM-8001 - Manual (Page 17)

5. In default, IP Power Manager is DHCP client enables. If there is no DHCP server in your
network. Please click “Set IP” button. Then enter an IP address that in the same segment of
your configuration PC. Please press “OK”.
6. Please press “Browse” button, then you will see a dialog box asking you the user name and
password. Please enter “admin” for first time configuration. If you have change the user
name and password, please enter correct user name and password of this dialog box.
Please press “OK”.
- 3 -
7. Then the IP Power Manager configuration web page will appear. You can check the power
outlet status in this web page. For more configurations, please check chapter 6 and refer the
details.