Paradyne U8777 - Manual (Page 179)

Index
8700-A2-GB20-40 May 2002 IN-3
Inband Management Channel (IBMC)
Options, A-37
status messages, 7-4
Inband Management Statistics, 7-20
intended audience, v
IP address
example, 5-2
selecting, 5-1
SNMP manager, 6-5
K
keyboard functions, 2-6
L
lamp test, 8-9
LEDs
front panel, 7-24
testing, 8-9
viewing through the ATI, 7-22
Line
Coding, A-10
DSX-1, A-7
Equalization, A-8
Framing
DS0 Cross Connect, A-5
DSX-1, A-8
G.703, A-10
Loopback, 8-4
Link Up LEDs, 7-24
link-layer protocols, 5-1
linkUp and linkDown traps, B-2
loading firmware, 9-4
local line loopback (LLB), 8-4
LOF (Loss Of Frame) status message, 7-4
login
DSLAM, 2-2
login ID, 6-1
access levels, 6-2
adding, 6-2
deleting, 6-4
loopback
DTE Loopback, 8-6
effect on LEDs, 7-24
Network Line Loopback, 8-4
Remote Send Line Loopback, 8-7
Repeater Loopback, 8-5
Telco-initiated, 8-11
LOS (Loss Of Signal) status message, 7-4–7-5
M
main menu, 2-2
Management
and Communication Options, A-28
port access, 6-1
port settings, 2-1
Margin Threshold, A-2
Max DSL AutoRate, A-3
MCC, defined, 1-2
MCP FFS, 3-7, 9-4
Memory Test n Fail, self-test result, 7-8
messages
health and status, 7-3
line 24, 7-10
self-test results, 7-7
test status, 7-9
MIB
list of supported MIBs, 1-4
support, 1-4
Monitor and Send 511 pattern, 8-8
monitoring, 7-1
N
navigating the screens, 2-6
Net Margin Threshold
status message, 7-5
Network
Interface Options, A-2
AutoRate, A-3
Circuit Identifier, A-5
DS0 Cross Connect Line Framing, A-5
Excessive Error Rate Threshold, A-3
Margin Threshold, A-2
Port Status, A-2
Transmit Attenuation, A-4
Line Loopback, 8-4
tests, 8-2
NMS
IP address, A-33
Number of Trap Managers, A-35
SNMP access, 6-5
SNMP connectivity, 5-1
No Test Active, status message, 7-9
O
OK LED, 7-24
OOF (Out Of Frame), status message, 7-5
options, configuration tables, A-1
overview
device features, 1-2
user’s guide, v