Panasonic TY-FB10WPU - Manual (Page 15)

15
2 Click [Detailed].
The units that can be connected are displayed on the “Select Access Port” window.
ヂ Network
When you specify the network number (See page 44) set
on the unit from one of [1], [2], [3], [4], and [U (USER)] 1 ,
units that are presently switched on in the selected
network number are displayed in [Projector Name]. The
initial value for both the computer and the unit is [1]
2 .
1-2 (See page 16)
ッ ID (See page 21)
Display
unit’s ID
ツ Mode (See page 24)
Display unit’s mode or style
ヅ Access Devices
When only one unit is connected, select [ ]. When
multiple units are connected, select [ ].
テ Available mode and functions
Among [Live mode], [Multi live mode], [One shot],
unavailable one is displayed with [ ].
デ The number of people connected to this unit
ト The status of this unit
ド [ ] appears when password entry is needed for
connection. (See page 20)
ナ Connection message
Blinks when connection is not possible.
Click to display information on resolving the issue.
(See page 17)
ニ Connectability
When you click “Connectability” the unit name and ID
are displayed in the upper left of the display to which the
selected unit is connected. If the unit name and ID are
displayed correctly, the message “Projector is available.”
will appear on the computer screen.
ヌ Designate (See page 20)
Designate units to be connected when ヂ is set to [U].
ネ ID Search (See page 21)
When you click [ID Search], a search for the unit of the
specified ID is carried out from among the units that are
presently switched on, from all channels other than [U].
Making Connections
(cont.)
ヂ
ッ
ツ
ナ ニ ヌ ネ
ヅ
テ
デ
ト
ド