Panasonic TY-FB10WPU - Manual (Page 18)

18
Detected issue Displayed information Remarks Reference page
When a change in
the settings made
by the utility has
been detected The settings of Wireless Network
connection have been changed.
When a Wireless LAN Card utility or
any other utilities are active,
stop the operation of such utilities,
then restart the application. The wireless LAN utility used by the computer may
have changed the wireless settings. Close the utility,
and then make the connection again using easy
wireless set up connection.
When a setting
error for the
wireless LAN card
has been detected No response from the wireless LAN
card.
Check the followings:
- Wireless LAN Card conditions
- Driver version (Latest) • Is the wireless LAN card effective?
• Is your wireless LAN card properly recognized?
• Some wireless cards may allow easy wireless set
up connections to function if drivers are updated.
P.56
When the user
does not have
the administrator
authority Please execute “Easy Connection”
using the administrator authorization
mode. If you have logged onto a computer as a [GUEST]
or a restricted user who does not have administrator
authority, you can not perform easy wireless set up
(Network No. [1] – [4]).
If you must perform wireless set up without
administrator authority, designate [U] as the network
number.
P.51
Making Connections
(cont.)